Malgré que nous n'ayons pour l'instant pas de réelles séquences de gameplay, Static Between Stations semble être l'un des projets indé les plus ambitieux à paraitre pour cette année 2026.
On parle ici d'un vrai gros RPG, avec points de compétences, combats en tour par tour et jets de dés à la clef.
Le ministre malaisien Zulkifli Hasan a suscité une polémique en déclarant devant le Parlement que le stress au travail pouvait pousser des individus à s’impliquer dans la communauté LGBT. Ses propos, largement critiqués et tournés en dérision, vont à l’encontre du consensus scientifique international et mettent en lumière la persistance de discours stigmatisants envers les minorités sexuelles et de genre en Malaisie.
L’article En Malaisie, un ministre affirme au Parlement que le stress au travail « rend gay » est apparu en premier sur Association STOP homophobie.
The development of cheaper, more powerful lasers has always been a cause for excitement among hackers, and fiber lasers are no exception. One of the newer tools they’ve enabled is the laser welder, which can be used to weld, cut through metal, or clean off surfaces. Or, as [Cranktown City] demonstrated, you can use one to build a metal 3D printer.
The printer’s built around a 2000-Watt fiber laser welder from Skyfire, and the motion system came from a defunct secondhand 3D printer built by an out-of-business insole printing company. The frame was reinforced with steel, the welding gun was mounted in place of the hotend, and the trigger was replaced with a CNC-controlled switch. It didn’t originally use any specific shielding gas, since the welder was supposed to perform adequately with just compressed air if high weld quality wasn’t essential.
The first few tests were promising, but did reveal quite a few problems. Heat buildup was an early issue which threatened to warp the build plate, and which eventually welded the build plate to the Z-axis gantry. Adding a strong cooling fan and putting a gap between the build plate and the gantry solved this. The wire also kept getting stuck to the build surface, which [Cranktown City] solved by pausing the wire feed and pulling it away from the part when a layer finished. Simply using compressed air led to a weak deposit that cracked easily, and while a nitrogen stream improved the print somewhat, argon shielding gas gave the best results. For his final print, [Cranktown City] made a vase. The layers were a bit crude, but better than most welder-based metal printers, and the system shows some real promise.
We’ve seen a few printers built around welders before, and a few built around lasers, but this seems to be the first to use both.
Je suis un peu con, et flemmard. C’est pour ça que je crée mes outils pour me simplifier le travail (ça me libère du temps pour réfléchir à le simplifier encore plus).
Quand on me dit qu’on peut faire quelque chose, je comprends « tu n’es pas obligé de le faire ».
Si c’est obligatoire, il fallait me dire « tu dois ».
C’est à ça que servent les mots avec un sens précis.
Les incompréhension et malentendus sont la raison pour laquelle un quart du monde est en ruine et en guerre (un autre quart pour le pétrole, un quart pour une question d’amis imaginaire, et le reste parce qu’un peuple brillamment décérébré a élu un psychopathe comme son président).
J’avais parlé de l’importance de l’insistance sur le choix des termes dans mon article expliquant comment écrire des tutos et des instructions : https://lehollandaisvolant.net/?d=2025/10/03/18/54/57-mes-astuces-pour-realiser-de-bons-tutoriels
Le tout en citant la RFC 2119 qui défini, pour les normes et recommandations de l’Internet, quand employer les termes doit / peut / obligatoirement / optionnel / …
Je remarque que certaines normes ISO / EN / NF ont parfois un paragraphe similaire. Je n’ai pas connaissance d’une norme dédiée, mais je copie ça là :
L’attention du lecteur est attirée sur les points suivants :
Seules les formes verbales doit et doivent sont utilisées pour exprimer une ou des exigences qui doivent être respectées pour se conformer au présent document.
Ces exigences peuvent se trouver dans le corps de la norme ou en annexe qualifiée de «normative». Pour les méthodes d’essai, l’utilisation de l’infinitif correspond à une exigence.
Les expressions telles que, il convient et il est recommandé sont utilisées pour exprimer une possibilité préférée mais non exigée pour se conformer au présent
document. Les formes verbales peut et peuvent sont utilisées pour exprimer une suggestion ou un conseil utiles mais non obligatoires, ou une autorisation.
En outre, le présent document peut fournir des renseignements supplémentaires destinés à faciliter la compréhension ou l'utilisation de certains éléments ou à en clarifier l'application, sans énoncer d'exigence à respecter. Ces éléments sont présentés sous forme de notes ou d'annexes informatives
Oui, il faudrait une norme globale pour ça (un calque de la RFC).
Quand quelque chose est obligatoire pour être valide, il faut que ça soit mis.
Quand quelque chose est recommandé (utile sans être obligatoire) ou non-recommandé (inutile voire dangereux sans être interdit), ça doit être dit aussi.
C’est con qu’il faille préciser ça, mais première nouvelle : les gens SONT cons.
En tant que rédacteur d’instruction de travail (une partie de mon travail), il est de ma responsabilité de faire en sorte que les gens comprennent et travaillent correctement. Dans certains cas, des vies sont en jeu (dans l’aérien, une défaillance c’est souvent synonyme d’accident et de morts).
En mettant « doit » au lieu de « peut », on se couvre. Si la personne comprend mal, c’est un accident.
En insistant sur la différence de doit et peut, si la personne commet encore l’erreur, c’est de l’incompétence ou du sabotage. Pas un accident.
Les normes, les lois, les instructions, devraient insister sur ça. Et choisir leur vocabulaire soigneusement.
Aucune interprétation ne doit être possible.
Un mec a transformé son site perso en lecteur de flux RSS, plus besoin de Miniflux ou autre merde à gérer. Tout est public, organisé par auteur, et ça tourne sur Cloudflare gratuitement. Le code est sur GitHub si ça te tente.
Les outils comme ChatGPT et Claude bouffent les écosystèmes qui les nourrissent : Stack Overflow en PLS, Tailwind qui licencie 75% de son équipe parce que plus personne n’achète leurs templates, et les auteurs de bouquins payés 3 balles pour des années de boulot. Les solutions proposées ? Soit payer les sites pour les crawler (mais ça change rien au fait que le vrai fric part chez les boîtes d’IA), soit un système de "pay-per-use" où l’IA cite ses sources et reverse un pourcentage aux créateurs. Sauf que techniquement, c’est pas gagné, et les géants de l’IA ont zéro intérêt à partager leur gâteau 🐍.
via https://classic.zoemp.be/dailyindie_recap.xml
Markdown c'est le format qui fait croire qu'écrire du HTML c'est chiant, alors qu'en vrai c'est juste un patchwork de règles floues qui pètent dès qu'on sort des cas basiques 😒.
Thread HN: https://news.ycombinator.com/item?id=46743199
Archive: http://web.archive.org/web/20260123234049/https://aartaka.me/markdown.html
Exe.dev propose des VMs à 20 balles/mois en partageant 2 CPU et 8 Go de RAM, et gère le routage SSH sans Host header en assignant des IPs uniques par compte pour reconnaître l'utilisateur via sa clé publique. Astucieux mais un peu tordu quand même 🤔
The British Army's ill-fated Ajax armored vehicle program now faces the prospect of being axed as the Ministry of Defence withdraws its initial operating capability status and reviews its future.…
La Russie réduit ses dépenses militaires parce que son économie est en PLS à cause de la guerre en Ukraine, des sanctions et du pétrole qui vaut moins cher qu’un kebab à 3h du mat’ 🥱. Même Poutine doit faire semblant de gérer son budget comme un étudiant en galère.
Bundle up! The 2026 Winter Olympic Games are just around the corner, and there are a number of LGBTQ+ Olympic stars we’ll be cheering on.
The Winter Games, running from 6 to 22 February, are taking place in Italy. Hosted jointly by the cities of Milan and Cortina d’Ampezzo, athletes will be descending on Northern Italy to compete.
LGBTQ+ athletes will be arriving in the snowy region with the hopes of making their countries proud, and maybe bringing home a gold medal.
This year’s Winter Games have already seen a showcase of LGBTQ+ talent with the stars of Heated Rivalry carrying the Olympic torch. However, there is a lot more to come.
Here are the LGBTQ+ athletes you should keep an eye on:
We predict American figure skater Amber Glenn will be one of the stars of this year’s Winter Games. The 26-year-old, who came out publicly as bisexual and pansexual in 2019, has been going from strength to strength.
Already this year, Glenn set a new record for the women’s US champion short program. She then became the first US woman in 21 years to win a third consecutive US championship.
Furthermore, just by taking to the ice in Italy, she’ll be making history as the first out LGBTQ+ woman to figure skate at any Olympics, Outsports reported.
Glenn has credited coming out and living as her true self as one of the reasons why she’s excelling on the ice. Reflecting on living as an out athlete, Glenn shared: “We have more acceptance and more of a community in the queer space, and I feel like I’ve been accepted with open arms, and that’s not the case for all sports.”
A real-life lesbian Heated Rivalry competing at this year’s Olympics. Yes, you heard right!
As depicted in Heated Rivalry, the National Hockey League has no active male players who are publicly out. However, when it comes to the Professional Women’s Hockey League, it’s a different story. There are around 30 out players, a number of whom are heading to this year’s Olympics.
Two of whom are engaged players, Sweden’s Anna Kjellbin and Finland’s Ronja Savolainen. Kjellbin and Savolainen first met while competing in the Swedish Women’s Hockey League as defensive players.
Now, however, they play for PWHL teams: Kjellbin plays for the Toronto Sceptres and Savolainen plays for the Ottawa Charge. That rivalry is being upped at the Olympics, as Kjellbin will be representing Sweden and Savolainen will be representing Finland.
This will be Savolainen’s third Olympic Games, winning bronze at both the 2018 and 2022 Games. Meanwhile, this year marks Kjellbin’s Olympic debut.
American speed skater Brittany Bowe will certainly be one to watch as the decorated athlete is a real medal contender.
Heading to her fourth Olympics, Bowe already has two bronze medals, from 2018 and 2022. She’s the current world record holder in the 1000 meters distance and has previously held the 1500 meters world record.
Bowe’s partner is fellow Olympian and ice hockey star Hilary Knight. Speaking to People recently, though she won an Olympic medal, Bowe said her “biggest win coming out of [the] Beijing” Olympics was meeting Knight. Adorable!
All eyes will be on legendary freestyle skier Gus Kenworthy at the Games after he dramatically came out of retirement. 2026 marks his fourth Olympic Games and he’ll be hitting the slopes as part of Team GB.
Kenworthy is the star of one of the most memorable Winter Olympic moments: at the 2018 Winter Olympics in Pyeongchang, South Korea, he and his partner at the time, actor Matthew Wilkas, shared a kiss that was broadcast. It became known as a significant moment for LGBTQ+ visibility in professional sports.
Kenworthy competed for the USA in his first two Games, but for the UK in his third. He won silver at the 2014 Sochi Winter Olympics. He then came out as gay the following year. In 2022, Kenworthy retired after a nasty crash and dropped out of the Beijing Winter Olympics.
Ice hockey player Hilary Knight is leading Team USA’s squad to the ice. The 36-year-old is practically the face of women’s hockey in the US. She is no stranger to the pressure, going for her fifth Olympic medal in her fifth appearance at the games.
She has one gold and three silvers from the previous four Olympic Games. Also, Knight captained Team USA to a gold medal at the 2025 world championships, so the team are looking strong ahead of the Olympics.
The team have been seeded in Group A, alongside Canada, Finland, Czechia and Switzerland.
Knight is part of the queer community and was initially hesitant about coming out publicly. However, she began dating speed skater Bowe after meeting her at the 2022 Olympics in Beijing. Knight credits her relationship with Bowe with helping her to find the courage to come out, talk about a power couple!
After her World Cup victory earlier this month, Kim Meylemans is on track for Olympic success. Meylemans is a skeleton racer: a high-speed winter sport, where an athlete lies face-down and head-first on a small sled, navigating an icy track at speeds of over 90mph.
The 29-year-old skeleton racer is returning for her third Olympics, after competing in 2018 and 2022. She’s on a fantastic career run at the moment, winning gold at both the 2024 and 2026 European Championships.
Meylemans is married to fellow racer Nicole Silveira. The pair met at the 2019 World Cup and hard-launched with an Instagram post in 2021: a picture of them kissing under mistletoe.
“This team right here is something truly special though and a big part of this success — I wouldn’t have achieved this goal without them, especially my wife,” Meylemans wrote in an Instagram post following her World Cup victory.
“Don’t think anyone truly understands how much I needed her with me (pushing & supporting me) to achieve this.”
Scottish figure skater Lewis Gibson is the 2025 world bronze medalist. Can he grab gold in 2026?
With his ice dance partner, Lilah Fear, Gibson is a four-time European medalist, an eight-time ISU Challenger Series gold medalist and an eight-time British national champion.
If his recent performance soundtracked to the Spice Girls’ “Wannabe” is anything to go by, Gibson brings an entertaining flourish to his impressive sporting showcase.
The 31-year-old first spoke about his sexuality in 2022. However, he’s remarked that he felt his public coming out was in a Valentine’s Day photo with his now-husband, Joshua Walsh.
Recently, Gibson added his voice to a growing movement in favour of allowing same-sex partnerships to compete internationally. Starting next season, British Ice Skating has permitted same-sex teams in national competitions.
Representing Team Brazil on the ice slopes, Nicole Silveira is a skeleton racer going up against her wife, Meylemans, in the high-speed sport.
Silveira’s career is also impressive. She finished 13th in 2022, Brazil’s best-ever result in sliding sports at the Winter Olympics. Then, she secured bronze at two of the World Cup stages of the 2024–25 season.
Silveira has also been open about her experiences as a queer athlete. “From the beginning, I wasn’t 100 percent sure that’s who I was and what I wanted. So it took me a while to finally be OK with it, I guess,” Silveira told TODAY in 2022.
“For a moment there, it was me hiding a lot of who I was and hiding Kim essentially from a lot of people and the closest people that I knew. It’s very special to be able to share [the] Olympic Games with your partner.
“It’s an extremely stressful, high-pressure period, so to have my person there as a comfort and safe space is of immense value to me, and also my performance. It brings a sense of calmness and normality into the [craziest] weeks of our career.”
Sanni Ahola – Women’s Hockey. Team Finland.
Erin Ambrose – Women’s Hockey. Team Canada.
Filippo Ambrosini – Figure Skating. Team Italy.
Chloe Aurard-Bushee – Women’s Hockey. Team France.
Cayla Barnes – Women’s Hockey. Team USA.
Lore Baudrit – Women’s Hockey. Team France.
Brittany Bowe – Speed Skating. Team USA.
Emily Clark – Women’s Hockey. Team Canada.
Alex Carpenter – Women’s Hockey. Team USA.
Guillaume Cizeron – Figure Skating. Team France.
Makayla Gerken Schofield – Freestyle Skiing. Team GB.
Lewis Gibson – Ice Dancing. Team GB.
Brianne Jenner – Women’s Hockey. Team Canada.
Nina Jobst-Smith – Women’s Hockey. Team Germany.
Breezy Johnson – Alpine Skiing. Team USA.
Krystina Kaltounkova – Women’s Hockey. Team Czech Republic.
Michelle Karvinen – Women’s Hockey. Team Finland.
Anii Keisala – Women’s Hockey. Team Finland.
Ida Kuoppala – Women’s Hockey. Team Finland.
Aneta Lédlová – Women’s Hockey. Team Czech Republic.
Emerance Maschmeyer – Women’s Hockey. Team Canada.
Conor McDermott-Mostowy – Speed Skating. Team USA.
Kim Meylemans – Skeleton. Team Belgium.
Bruce Mouat – Curling. Team GB.
Sandra Naeslund – Freestyle Skiing. Team Sweden.
Marie-Philip Poulin – Women’s Hockey. Team Canada.
Paul Poirier – Figure Skating. Team Canada.
Shilo Rousseau – Biathlon. Team Canada.
Martina Sablikova – Speed Skating. Team Czech Republic.
Maddy Schaffrick – Snowboarding. Team USA.
Nicole Silveira – Skeleton. Team Brazil.
Laura Stacey – Women’s Hockey. Team Canada.
Viivi Vainikka – Women’s Hockey. Team Finland.
Laura Wolf – Freestyle Skiing. Team Australia.
Micah Zandee-Hart – Women’s Hockey. Team Canada.
Laura Zimmermann – Women’s Hockey. Team Switzerland.
The post Here are all of the inspiring LGBTQ+ stars to look out for at the 2026 Winter Olympics appeared first on PinkNews | Latest lesbian, gay, bi and trans news | LGBTQ+ news.
PostmarketOS is a Linux distribution specifically designed for those who wish to repurpose old smartphones as general-use computers, to a degree. This can be a great way to reuse old hardware. However, for [Bry50], it was somewhat discomforting leaving the phone’s aging lithium battery perpetually on charge. A bit of code was thus whipped up to provide a greater measure of safety.
The concept is simple enough—lithium batteries are at lower risk of surprise combustion events if they’re held at a lower state of charge. To this end, [Bry50] modified the device tree in PostmarketOS to change the maximum charge level. Apparently, maximum charge was set at a lofty 4.4V (100%), but this was reconfigured to a lower level of 3.8V, corresponding to a roughly 40-50% state of charge. The idea is that this is a much healthier way to maintain a battery hooked up to power for long periods of time. There’s one small hitch—the system will get confused if the battery voltage is higher than the 3.8 V setpoint when switching over. It’s thus important to let the device discharge to a lower level if you choose to make this change.
It’s a neat mod that both increases safety, but keeps the battery on hand to let the system ride through minor power outages. If you’re new to the world of repurposing old smartphones, fear not. [Bryan] also has a tutorial on getting started with PostmarketOS for the unfamiliar. If you’re working on your own projects in this space, we’d love to hear about them—so get on over to the tipsline!
Genres/Tags: Exploration, First-person, 3D
Company: LucidDreamLab
Languages: RUS/ENG/MULTI8
Original Size: 24.9 GB
Repack Size: 18.1 GB
)
Discussion and (possible) future updates on CS.RIN.RU thread
Take a nap in your bed on a lazy, sun-drenched afternoon; wander through the pedestrian street with its faint, damp scent – the one you used to walk with your mother after school; or return to an empty campus, the place where you once “battled” day and night.
There are no cliched jump scares or task lists here – only those fragments of old times that were once mundane but are now nowhere to be found.
Game Features
The post Millennium Dream appeared first on FitGirl Repacks.
22/01/2026-28/01/2026
[1] | « N’achetez pas de plans de ville fantaisistes, créez les vôtres avec ce script gratuit » | Données cartographiques © Cartographes OpenStreetMap.
que 22 volontaires ont participé aux défis MapRoulette dans les cinq régions du Danemark, ce qui a permis d’ajouter au total quelque 71 251 routes et chemins flambant neufs au Danemark. ► qu’un mapathon aura lieu à Belfast le samedi 21 février 2026, de 11 heures à 13 heures. L’événement est limité à 30 participants, qui peuvent s’inscrire via le lien prévu à cet effet. ► le rapport Analyse des éléments OSM complétés en 2025 dans les villes de la Chine continentale, qui montre la distribution de l’exhaustivité des éléments OpenStreetMap dans les communes de 31 provinces, régions autonomes et municipalités de Chine continentale. comment diviser un polygone de bâtiment avec des angles droits parfaits dans JOSM. ► . ► un rapport plus long. qu’elle avait temporairement bloqué les nouveaux enregistrements de comptes OpenStreetMap provenant du réseau Tor à la suite d’abus constants de la part d’un acteur malveillant. ► comment créer ses propres plans de ville en art mural à l’aide de MapToPoster et de données OpenStreetMap. que Nathan a généré un jeu complet de cartes de Bellingham (Washington, USA), en utilisant City Map Poster Generator, un script Python qui génère des affiches cartographiques minimalistes à partir de données OpenStreetMap. qu’OpenStreetMap a une couverture relativement bonne des données de revêtement des routes à travers l’Irlande. ► comment planifier une excursion en utilisant QMapShack, une application bureautique open-source pour la planification d’itinéraires, ainsi que Freizeitkarte, des cartes vectorielles hors ligne dérivées de données OpenStreetMap. les cartographes de Perm, reconnue comme la ville la plus verte de Russie, à ne pas oublier d’ajouter des espaces verts et des chemins piétonniers, car les données OSM sont utilisées comme base pour les cartes des arrêts de transport public de la ville. Cependant, les participants au chat ont fait remarquer que l’attribution OSM n’était pas respectée. Alexander a transmis ce commentaire et a signalé que les nouvelles cartes incluent désormais l’attribution OSM. ► MapLibre Tile (MLT), un nouveau format de dalles vectorielles moderne et efficace. MLT est destiné à succéder à Mapbox Vector Tile. ► un projet de week-end consistant à créer une application web pour enregistrer rapidement des coordonnées GNSS en vue d’une édition ultérieure sur OpenStreetMap. Bien que techniquement fonctionnel, le prototype a révélé des problèmes tels que la mise en cache du GNSS, des données ambiguës et des défis en matière de post-traitement et de cartographie. ► des fichiers Parquet dérivés en continu des données de réplication d’OpenStreetMap. Cela élimine les retraitements coûteux et permet une analyse transparente du cycle de vie complet des données OSM en temps quasi réel. ► les GeoPDF en cartes interactives avec MapTiler et essayer ► le nouveau mode sombre du fond de carte OpenStreetMap. ► un outil permettant d’ajouter des liens Wikipédia aux objets OSM. OWL Map a été suggéré comme successeur de l’outil OSM Wikidata Matcher, qui n’est pas maintenu. ► dans le blog de Walker Data à propos du support de mapgl 0.4.4 pour générer des légendes de cartes interactives, qui peuvent être catégoriques ou continues. ► une analyse des extensions de cartographie pour WordPress, en soulignant certaines qui utilisent les données OSM. ► la version 2026.01.24 de l’application, qui apporte de nouvelles données OSM et améliore l’affichage des routes parmi de nombreuses autres fonctionnalités et corrections. ► que Geofabrik vient d’ajouter une nouvelle vue à OSM Inspector qui rend les limites des codes postaux (polygones 
Connexionpostal_code=* ). les bases de la conférence FOSSGIS d’aujourd’hui ? ► au Danemark, ce qui a incité le radiodiffuseur national danois DR à recommander ► Des alternatives aux applications cartographiques basées sur OpenStreetMap, telles que CoMaps et OsmAnd. ► Earth Observation, une nouvelle revue scientifique en libre accès, consacrée à la discussion et à la publication d’études et de recherches originales sur les technologies et les méthodes d’observation de la Terre. ► sur le blog A Cartographer’s Tale un article sur les régions du monde qui se sont élevées au-dessus du niveau de la mer au cours de la dernière période glaciaire. ► qu’un déplacement de la frontière entre l’Indonésie et la Malaisie a eu pour conséquence que trois villages de la régence de Nunukan ont été désignés comme faisant partie de la région administrative de la Malaisie.| Pays | Où | Lieu de l’événement | Quoi | Quand |
|---|---|---|---|---|
|
नई दिल्ली | Jitsi Meet (online) | OSM India – Monthly Online Mapathon
|
2026-02-01 |
|
EPN d’Arlon, rue de Diekirch 37, Arlon | EPN d’Arlon – OpenStreetMap – Découverte
|
2026-02-03 | |
|
Milano | Building 3A Ground Floor – Politecnico di Milano | PoliMappers Maptedì
|
2026-02-03 |
|
Salzburg | Bewohnerservice Elisabeth-Vorstadt | OSM-Treffpunkt
|
2026-02-03 |
|
Lille | Salle Yser, MRES, Lille | Rencontre OSM des contributeurs autour de Lille
|
2026-02-03 |
|
Santa Clara | Santa Clara University | Lucy Lamoureux
|
2026-02-03 |
|
Santa Clara | Santa Clara University |
|
2026-02-03 |
| Missing Maps London: (Online) Mapathon [eng]
|
2026-02-03 | |||
|
Essen | Verkehrs- und Umweltzentrum | Essen OSM-Treffen
|
2026-02-03 |
|
Marseille | Espace Villeneuve Bargemon | Marseille à la carte !
|
2026-02-04 |
| iD Community Chat
|
2026-02-04 | |||
|
City of Westminster | Greene Man pub | London OpenStreetMap meet-up
|
2026-02-04 |
|
Stuttgart | Stuttgart | Stuttgarter OpenStreetMap-Treffen
|
2026-02-04 |
|
Montpellier | La Base | Mapathon OSM à La Base : cartographier Haïti pour la prévention des risques
|
2026-02-05 |
|
Le Schmilblick, Montrouge | Réunion des contributeurs de Montrouge et du Sud de Paris
|
2026-02-05 | |
|
Freiburg im Breisgau | CCCFR | OSM-Treffen Freiburg/Brsg.
|
2026-02-05 |
| OSMF Engineering Working Group meeting
|
2026-02-06 | |||
|
Braunschweig | Stratum 0 | Braunschweiger Mappertreffen im Stratum 0 Hackerspace
|
2026-02-07 |
|
København | Cafe Bevar’s | OSMmapperCPH
|
2026-02-08 |
| Missing Maps : Mapathon en ligne – CartONG [fr]
|
2026-02-09 | |||
|
臺北市 | MozSpace Taipei | OpenStreetMap x Wikidata Taipei #85
|
2026-02-09 |
|
EPN d’Arlon, rue de Diekirch 37, Arlon | EPN d’Arlon – OpenStreetMap – Utilisation
|
2026-02-10 | |
|
Hamburg | Voraussichtlich: « Variable », Karolinenstraße 23 | Hamburger Mappertreffen
|
2026-02-10 |
|
New York | Online | MSF USA Virtual February Mapathon
|
2026-02-11 |
|
Zürich | Bitwäscherei Zürich | 184. OSM-Stammtisch Zürich
|
2026-02-11 |
| Online Mapathon von ÄRZTE OHNE GRENZEN
|
2026-02-11 | |||
|
Wien | Schlupfwinkel (Kleine Neugasse 10, 1040 Wien) | 77. Wiener OSM-Stammtisch
|
2026-02-11 |
|
München | Echardinger Einkehr | Münchner OSM-Treffen
|
2026-02-11 |
|
Seattle | 1215 E Columbia St, Seattle, WA 98122, US | Olympia, Connected
|
2026-02-12 |
| UN Mappers: Validation Training
|
2026-02-13 | |||
|
Delhi | ILUGD Meetup × OSM Delhi Mapping Party No.26 (North Zone)
|
2026-02-15 |
Note: Pour que votre événement apparaisse dans l’hebdoOSM, ajoutez-le au calendrier OSM.
Cet hebdoOSM a été préparé par MatthiasMatthias, PierZen, Raquel Dezidério Souto, SeverinGeo, Strubbl, derFred, jcr83, renecha.
Genres/Tags: Lifestyle, Third-person, 3D
Company: Eduweb
Languagse: RUS/ENG/MULTi10
Original Size: 8.5 GB
Repack Size: 4.4/5.3 GB
)
Discussion and (possible) future updates on CS.RIN.RU thread
Surviving in the wilderness is far from easy! Hone your hunting skills by practicing on animals such as elk, mule deer, and moose. Once you’ve grasped their differences and know your limits against your selection of prey, seek out another wolf to become your mate and form a pack together. Explore fields and forests across Yellowstone National Park while you establish a territory and choose a den. Raise your pups by feeding them and playing with them. Protect them from deadly predators who try to kill them.
Over time, your family will outgrow the need for a den and become nomadic, where you teach your pups how to catch their own prey. By next spring they will be yearlings, and test these new skills to help raise the next litter. Eventually, some will venture out on their own and disperse, just as you did all that time ago.
Explore realistic recreations of select locations within Yellowstone National Park. Set in the Northern Range (often referred to as “the Serengeti of North America”), where many animals roam meadows, sagebrush steppe grasslands, alpine forests, and high ridges.
But be wary – you are not the only wolf in the area. Rival packs make their home across the landscape and don’t take kindly to sight-seeing intruders. Other dangers roam the lands as well – grizzly bears, cougars, and coyotes among them who will vie with you for territory and food.
Game Features
Included DLCs:
Backwards Compatibility
This repack IS NOT backwards compatible with my previous WQAE repack.
The post WolfQuest: Anniversary Edition – v3.0 + 6 DLCs/Bonuses appeared first on FitGirl Repacks.
This is just a notice for my subscribers about freshly updated WolfQuest: Anniversary Edition repack. Now it’s updated to v3.0 and includes 6 DLCs/Bonuses.
The post WolfQuest: Anniversary Edition Repack Updated appeared first on FitGirl Repacks.
