Comments

There’s an interesting development in amateur ballooning: using so-called superpressure balloons, which float high in the atmosphere indefinitely rather than simply going up and up and then popping like a normal weather balloon. Superpressure balloons can last for months and travel long distances, potentially circumnavigating the globe, all the while reporting their position.

You might imagine that an undertaking like this would be immensely difficult and cost thousands of dollars. In fact, you can build and launch such a balloon for about the cost of a fancy dinner out. You just have to think small! That’s why amateur balloonists call them pico balloons.

The payload of a pico balloon is so light (between 12 to 30 grams) that you can use a large Mylar party balloon filled with helium to lift it. They’re also inexpensive; that’s important because you won’t get your payload back. And because such diminutive payloads don’t pose a danger to aircraft, they aren’t subject to the many rules and restrictions on free-floating balloons that carry more mass.

The essential advances that made pico ballooning possible were figuring out how to track a balloon no matter where in the world it might be and how to power such tiny payloads. A lot of folks worked on these challenges and came up with good solutions that aren’t hard or expensive to reproduce.

What is WSPR?

Amazingly, the global tracking of the balloon’s telemetry is done without satellites. Instead, pico balloonists take advantage of an amateur-radio network called WSPR (Weak Signal Propagation Reporter), a protocol developed by a rather famous ham-radio enthusiast—Joseph Hooton Taylor Jr., one of the two scientists awarded the 1993 Nobel Prize in Physics for discovering binary pulsars.

A Raspberry Pi Pico microcontroller [top left] is soldered directly to a daughterboard consisting of a high-frequency transmitter and a GPS module [bottom left], which are all powered by solar panels [right].James Provost

WSPR was designed to monitor signal-propagation conditions for different radio bands—useful information if you’re a ham trying to make distant contacts. WSPR can also record low-power balloon-telemetry signals. WSPR is very low bandwidth—less than 10 bits per minute—but it does the job. A worldwide network of radio amateurs receives these WSPR signals and reports them publicly over the internet, which gives picoballoonists a way to track their flights. You need at least a general-class ham-radio license to launch a pico balloon, as one is required to transmit on the bands used for long-distance telemetry.

The pico balloon payload I chose to build is based on the aptly named US $4 Raspberry Pi Pico board, with a solder-on daughterboard that contains a GPS receiver and transmitter. The folks who developed this daughterboard and associated software (to create what they call the Jetpack WSPR Tracker) have done a fantastic job of making their work easy to reproduce.

You could, in principle, power the Jetpack tracker with batteries, but in practice it would be impossible to keep them warm in the stratosphere, where average temperatures can be as low as –51 °C. Instead, the tracker runs off two lightweight solar modules. At night, it gracefully powers down. When the sun rises high enough in the morning, the tracker powers up and starts transmitting again.

My first pico balloon made it only halfway across the Atlantic before going silent.

I had five Jetpack boards custom-manufactured in China for just $39. The cost nearly doubled after adding shipping and tariff charges. Still that’s really cheap, even when you add the cost of the Raspberry Pi ($4), the party balloon ($10 for two), the helium ($10 at my local supermarket), and the two solar modules ($7 each).

The biggest sticking point I had with the Jetpack design was the liberties it takes with spurious emissions from its transmitter. Federal Communications Commission (FCC) regulations call for spurious emissions to be at least 43 decibels below the power of the transmitted signal. But my transmitter had strong unwanted emissions at odd harmonics of the fundamental frequency. (That’s because the transmitter is a Si5351A temperature-controlled oscillator, which outputs a square wave, not a sinusoid.) Taking measurements, I could see that the third harmonic at 42 megahertz was only 25 dB quieter than the 14-MHz fundamental of my WSPR signal’s frequency.

As of press time, the WSPR network had tracked my balloon from the Eastern United States to the Mediterranean coast. James Provost

In practical terms, this shouldn’t create any noticeable interference, given that this transmitter puts out milliwatts at most and floats miles away from the nearest receiver. Still, I wanted to be fully compliant with FCC regulations, so I added traps to the antenna—simple circuit elements that hams use to allow a single antenna to work on multiple bands by altering how the antenna resonates at different frequencies. Each trap was made of a small inductor (four 5-millimeter-diameter loops of No. 32 magnet wire) in parallel with a 220-picofarad capacitor. I tuned them with the help of a NanoVNA signal analyzer by stretching the loops apart slightly. I attached the traps directly to the tracker board, so that they quashed the spurious 42-MHz emissions at the source. That worked well and added only 0.3 grams of weight.

With my payload complete, I partially filled my balloon with helium. You want the balloon to hold just a little more gas than it takes to lift the payload off the ground. This will give the helium room to expand as the balloon climbs to its final altitude.

My first pico balloon, launched from a park near my home in North Carolina, made it only halfway across the Atlantic before going silent. My second went up and was never heard from again. The third was indeed the charm. It crossed the Iberian Peninsula and at the time of this writing is somewhere over the Mediterranean at an altitude of nearly 12 kilometers. With any luck, it might go on to orbit the planet.

I’m a little puzzled about the balloons’ telemetry messages received on the WSPR network, as they have been few and far between. My best guess is that power from the horizontal solar panels I’m using is marginal, with the winter sun being so low in the sky. That’s something I should have thought about before launching the first balloon just 24 hours after the winter solstice!

This article appears in the February 2026 print issue as “Long-Duration Amateur Ballooning.”

Comments

Comments

Comments

• lien nᵒ 1 : April
• lien nᵒ 2 : Agenda du Libre
• lien nᵒ 3 : Carte des événements
• lien nᵒ 4 : Proposer un événement
• lien nᵒ 5 : Annuaire des organisations
• lien nᵒ 6 : Agenda de la semaine précédente
• lien nᵒ 7 : Agenda du Libre Québec

Commentaires : voir le flux Atom ouvrir dans le navigateur

An arrest has been made by authorities in Thailand investigating the murder of Tin Zaw Htwe, a 25-year-old TikTok star with over a million followers, whose body was discovered in a forest near the Myanmar border last week.

The popular gay influencer, who had a flair for fashion and shared tips, product endorsements, and lip-synced songs with his followers, was a Myanmar national.

Related

They looked “picture perfect” on Instagram. His husband allegedly stabbed him to death.

According to local reports, he was beaten to death.

Authorities were alerted last Tuesday after a villager herding animals discovered his body beneath a tree in a forested area in the Mae Sot District, about 300 miles from the capital in Bangkok.

Never Miss a Beat

Subscribe to our newsletter to stay ahead of the latest LGBTQ+ political news and insights.
Subscribe to our Newsletter today

Police found the victim face down, wearing a yellow T-shirt underneath a black jacket, and black sweatpants or trousers. His belt buckle was undone, and his underwear and sweatpants were pulled down above his thighs. Dried blood caked his face and head.

Nearby, a blood-stained wooden bat, suspected as the murder weapon, was found. Wounds on his head and face were consistent with being struck by a heavy object, police said.

Close to the body, authorities found an alcohol bottle, the victim’s shoulder bag, cosmetics, a bank book, condoms, and other personal items. The young man’s gold jewelry and iPhone 17 were missing from the scene.

Photographs from the crime scene reveal the victim was shoeless when he was discovered, with his belongings strewn around him. The bat rests on the ground inches from his head.

The influencer had been gone two days before his body was discovered, according to friends interviewed by police.

A housemate told authorities that before he vanished, the victim received a social media call for help. Trusting the caller, the TikTok influencer went to meet them, they said.

Police believe two suspects lured Tin Zaw Htwe to the secluded spot where he was killed, according to the Bangkok Post.

The popular influencer was cremated at Luang Mae Sot Cemetery on Saturday after a gathering of friends and family.

While police say Tin Zaw Htwe left home two days before his body was discovered, his final video posted just a day earlier, raising questions over the timeline of events before he was found.

Authorities say the investigation is ongoing.

In the week since news of Tin Zaw Htwe’s death spread, his TikTok account, @irrawaddyma, has gained over 200,000 followers.  

Subscribe to the LGBTQ Nation newsletter and be the first to know about the latest headlines shaping LGBTQ+ communities worldwide.

The Disconnected Git Workflow

Using git-send-email while being offline and with multiple email accounts

WARNING: the following is a technical reminder for my future self. If you don’t use the "git" software, you can safely ignore this post.

The more I work with git-send-email, the less I find the GitHub interface sufferable.

Want to send a small patch to a GitHub project? You need to clone the repository, push your changes to your own branch, then ask for a pull request using the cumbersome web interface, replying to comments online while trying to avoid smileys.

With git send-email, I simply work offline, do my local commit, then:

git send-email HEAD^

And I’m done. I reply to comments by email, with Vim/Mutt. When the patch is accepted, getting a clean tree usually boils down to:

git pull
git rebase

Yeah for git-send-email!

• Guide to setup git send-email (git-send-email.io)

And, yes, I do that while offline and with multiple email accounts. That’s one more reason to hate GitHub.

• How GitHub monopoly is destroying the open source ecosystem (ploum.net)
• We need to talk about your GitHub addiction (ploum.net)

One mail account for each git repository

The secret is not to configure email accounts in git but to use "msmtp" to send email. Msmtp is a really cool sendmail replacement.

In .msmtprc, you can configure multiple accounts with multiple options, including calling a command to get your password.

# account 1 - pro
account work
host smtp.company.com
port 465
user login@company.com
from ploum@company.com
password SuPeRstr0ngP4ssw0rd
tls_starttls off

# personal account for FLOSS
account floss
host mail.provider.net
port 465
user ploum@mydomain.net
from ploum@mydomain.net
from ploum*@mydomain.net
passwordeval "cat ~/incredibly_encrypted_password.txt | rot13"
tls_starttls off

The important bit here is that you can set multiple "from" addresses for a given account, including a regexp to catch multiple aliases!

Now, we will ask git to automatically use the right msmtp account. In your global .gitconfig, set the following:

[sendemail]
   sendmailCmd = /usr/bin/msmtp --set-from-header=on
   envelopeSender = auto

The "envelopesender" option will ensure that the sendemail.from will be used and given to msmtp as a "from address." This might be redundant with "--set-from-header=on" in msmtp but, in my tests, having both was required. And, cherry on the cake, it automatically works for all accounts configured in msmtprc.

Older git versions (< 2.33) don’t have sendmailCmd and should do:

[sendemail]
   smtpserver = /usr/bin/msmtp
   smtpserveroption = --set-from-header=on
   envelopesender = auto

I usually stick to a "ploum-PROJECT@mydomain.net" for each project I contribute to. This allows me to easily cut spam when needed. So far, the worst has been with a bug reported on the FreeBSD Bugzilla. The address used there (and nowhere else) has since been spammed to death.

In each git project, you need to do the following:

1. Set the email address used in your commit that will appear in "git log" (if different from the global one)

git config user.email "Ploum <ploum-PROJECT@mydomain.net>"

2. Set the email address that will be used to actually send the patch (could be different from the first one)

git config sendemail.from "Ploum <ploum-PROJECT@mydomain.net>"

3. Set the email address of the developer or the mailing list to which you want to contribute

git config sendemail.to project-devel@mailing-list.com

Damn, I did a commit with the wrong user.email!

Yep, I always forget to change it when working on a new project or from a fresh git clone. Not a problem. Just use "git config" like above, then:

git commit --amend --reset-author

And that’s it.

Working offline

I told you I mostly work offline. And, as you might expect, msmtp requires a working Internet connection to send an email.

But msmtp comes with three wonderful little scripts: msmtp-enqueue.sh, msmtp-listqueue.sh and msmtp-runqueue.sh.

The first one saves your email to be sent in ~/.msmtpqueue, with the sending options in a separate file. The second one lists the unsent emails, and the third one actually sends all the emails in the queue.

All you need to do is change the msmtp line in your global .gitconfig to call the msmtpqueue.sh script:

[sendemail]
    sendmailcmd = /usr/libexec/msmtp/msmtpqueue/msmtp-enqueue.sh --set-from-header=on
    envelopeSender = auto 

In Debian, the scripts are available with the msmtp package. But the three are simple bash scripts that can be run from any path if your msmtp package doesn’t provide them.

You can test sending a mail, then check the ~/.msmtpqueue folder for the email itself (.email file) and the related msmtp command line (.msmtp file). It happens nearly every day that I visit this folder to quickly add missing information to an email or simply remove it completely from the queue.

Of course, once connected, you need to remember to run:

/usr/libexec/msmtp/msmtpqueue/msmtp-runqueue.sh

If not connected, mails will not be sent and will be kept in the queue. This line is obviously part of my do_the_internet.sh script, along with "offpunk --sync".

• How I use Offpunk (by Ploum) (offpunk.net)

It is not only git!

If it works for git, it works for any mail client. I use neomutt with the following configuration to use msmtp-enqueue and reply to email using the address it was sent to.

set sendmail="/usr/libexec/msmtp/msmtpqueue/msmtp-enqueue.sh --set-from-header=on"
unset envelope_from_address
set use_envelope_from
set reverse_name
set from="ploum@mydomain.net"
alternates ploum[A-Za-z0-9]*@mydomain.net

Of course, the whole config is a little more complex to handle multiple accounts that are all stored locally in Maildir format through offlineimap and indexed with notmuch. But this is a bit out of the scope of this post.

At least, you get the idea, and you could probably adapt it to your own mail client.

Conclusion

Sure, it’s a whole blog post just to get the config right. But there’s nothing really out of this world. And once the setup is done, it is done for good. No need to adapt to every change in a clumsy web interface, no need to use your mouse. Simple command lines and simple git flow!

Sometimes, I work late at night. When finished, I close the lid of my laptop and call it a day without reconnecting my laptop. This allows me not to see anything new before going to bed. When this happens, queued mails are sent the next morning, when I run the first do_the_internet.sh of the day.

And it always brings a smile to my face to see those bits being sent while I’ve completely forgotten about them…

Five Years Ago

This week in 2021, we looked at the future of net neutrality under the new interim FCC boss, and at how broadband monopolies continued to get money for networks they never fully deployed. Twitter got immunity from a banned user’s lawsuit thanks to Section 230, while dozens of human rights groups were telling congress not to gut Section 230 on their behalf, and we wrote about how revoking 230 would not “save democracy”. This came as House Republicans announced their big, unconstitutional, ridiculous plan to take on Big Tech, and we wrote about how they could actually tackle the sector by just trying to stop being insane.

Ten Years Ago

This week in 2016, the New York Times filed a ridiculous copyright lawsuit over a book mocking the paper for glamorizing war, a writer tried to claim libel and copyright infringement over a screencap of her tweet appearing in an article, and a judge tossed out the silly idea that the monkey of monkey selfie fame could hold the copyright to the photo. Meanwhile, copyright troll Malibu Media trotted out an “expert” witness who appeared to be completely clueless, Pissed Consumer got the go ahead to take on Roca Labs over its bogus DMCA takedowns, and we dedicated an episode of the podcast to looking at just how bad the TPP was.

Fifteen Years Ago

This week in 2011, the big copyright troll in the news was ACS:Law, as an accounting firm that was helping it collect fines tried to call off the whole thing followed by ACS:Law apparently giving up entirely, but soon there was a new trolling operation on the block involving Paris Hilton’s sex tape, and another with a porn company trying out a twist on the technique, while a copyright troll in Germany was using debt collectors to pressure people to pay up. Meanwhile, IP experts were saying ACTA was inconsistent with EU law, the US government was pushing pro- and anti-privacy internet rules at the same time, and Apple began using its special security screws to prevent people from opening their iPhones.

Thomas Edison is well known for his inventions (even if you don’t agree he invented all of them). However, he also occasionally invented things he didn’t understand, so they had to be reinvented again later. The latest example comes from researchers at Rice University. While building a replica light bulb, they found that Thomas Edison may have accidentally created graphene while testing the original article.

Today, we know that applying a voltage to a carbon-based resistor and heating it up to over 2,000 °C can create turbostratic graphene. Edison used a carbon-based filament and could heat it to over 2,000 °C.

This reminds us of how, in the 1880s, Edison observed current flowing in one direction through a test light bulb that included a plate. However, he thought it was just a curiosity. It would be up to Fleming, in 1904, to figure it out and understand what could be done with it.

Naturally, Edison wouldn’t have known to look for graphene, how to look for it, or what to do with it if he found it. But it does boggle the mind to think about graphene appearing many decades earlier. Or maybe it would still be looking for a killer use. Certainly, as the Rice researchers note, this is one of the easier ways to make graphene.

#6464 Feastopia v1.0.0.30 + Bonus OST

Genres/Tags: Simulation, Management, Strategy
Companies: White Star Studio, IndieArk
Languages: ENG/MULTI4
Original Size: 2.4 GB
Repack Size: 713 MB

Download Mirrors (Direct Links)

• Filehoster: DataNodes (Speed & Usability) [Use IDM]
• Filehoster: FuckingFast (REALLY Fucking Fast )
• Filehoster: MultiUpload (10+ hosters, interchangeable) [Use JDownloader2]

Download Mirrors (Torrent)

• 1337x | [magnet] [.torrent file only]
  
• Tapochek.net

Discussion and (possible) future updates on CS.RIN.RU thread

Screenshots (Click to enlarge)

Repack Features

• Based on Feastopia-TENOKE ISO release: tenoke-feastopia.iso (2,618,523,648 bytes)
• Game version: v1.0.0.30
• 100% Lossless & MD5 Perfect: all files are identical to originals after installation
• Bonus OST in WAV format nullified, NOTHING re-encoded. Bonus OST in MP3 format is included by default
• Significantly smaller archive size (compressed from 2.4 GB to 713 MB)
• Installation takes 1-2 minutes
• After-install integrity check so you could make sure that everything installed properly
• HDD space after installation: 2.4 GB
• Language can be changed in game settings
• Repack uses XTool library by Razor12911
• At least 2 GB of free RAM (inc. virtual) required for installing this repack

The post Feastopia – v1.0.0.30 + Bonus OST appeared first on FitGirl Repacks.

Assistive technology is expensive, and many people with disabilities live on fixed incomes. Disabled assistive tech users also must contend with equipment that was often designed without any capacity to be repaired or modified. But assistive tech users ultimately need the functionality they need—a wheelchair that isn’t constantly needing to be charged, perhaps, or a hearing aid that doesn’t amplify all background noise equally. Assistive tech “makers,“ who can hack and modify existing assistive tech, have always been in high demand.

Therese Willkomm, emeritus professor of occupational therapy at the University of New Hampshire, has written three books cataloging her more than 2,000 assistive technology hacks. Wilkomm says she aims to keep her assistive tech hacks costing less than five dollars.

She’s come to be known internationally as the “MacGyver of Assistive Technology” and has presented more than 600 workshops and assistive tech maker days across 42 states and 14 countries.

IEEE Spectrum sat down with Willkomm ahead of her latest assistive tech Maker Day workshop, on Saturday, 31 Jan., at the Assistive Technology Industry Association (ATIA) conference in Orlando. Over the course of the conversation, she discussed the evolution of assistive technology over 40 years, the urgent need for affordable communication devices, and why the DIY movement matters now more than ever.

IEEE Spectrum: What got you started in assistive technology?

Therese Wilkomm: I grew up in Wisconsin where my father had a machine shop and worked on dairy and hog farms. At age ten, I started building and making things. A cousin was in a farm accident and needed modifications to his tractor, which introduced me to welding. In college, I enrolled in vocational rehabilitation and learned about rehab engineering—assistive technology wasn’t coined until 1988 with the Technology-Related Assistance Act. In 1979, Gregg Vanderheiden came to the University of Wisconsin-Stout and demonstrated creative things with garage door openers and communication devices. I thought, wow, this would be an awesome career path—designing and fabricating devices and worksite adaptations for people with disabilities to go back to work and live independently. I haven’t looked back.

You’ve created over 2,000 assistive technology solutions. What’s your most memorable one?

Wilkomm: A device for castrating pigs with one hand. We figured out a way to design a device that fit on the end of the hog crate that was foot-operated to hold the hind legs of the pig back so the procedure could be done with one hand.

Assistive Technology’s Changing Landscape

How has assistive technology evolved over the decades?

Wilkomm: In the 1980s, we fabricated devices from wood and early electronics. I became a [Rehabilitation Engineering and Assistive Technology Society of North America, a.k.a. RESNA] member in 1985. The 1988 Technology-Related Assistance Act was transformational—all fifty states finally got funding to support assistive technology and needs in rural areas. Back in the ‘80s, we were soldering and making battery interrupters and momentary switches for toys, radios, and music. Gregg was doing some things with communication. There were Prentke Romich communication devices. Those were some of the first electronic assistive technologies.

The early 1990s was all about mobile rehab engineering. Senator Bob Dole gave me a $50,000 grant to fund my first mobile unit. That mobile unit had all my welding equipment, all my fabrication equipment, and I could drive farm to farm, set up outside right in front of the tractor, and fabricate whatever needed to be fabricated. Then around 1997, there were cuts in the school systems. Mobile units became really expensive to operate. We started to look at more efficient ways of providing assistive technology services. With the Tech Act, we had demonstration sites where people would come and try out different devices. But people had to get in a car, drive to a center, get out, find parking, come into the building—a lot of time was being lost.

In the 2000s, more challenges with decreased funding. I discovered that with a Honda Accord and those crates you get from Staples, you could have your whole mobile unit in the trunk of your car because of advances in materials. We could make battery interrupters and momentary switches without ever having to solder. We can make switches in 28 seconds, battery interrupters in 18 seconds. When COVID happened, we had to pivot—do more virtual, ship stuff out to people. We were able to serve more individuals during COVID than prior to COVID because nobody had to travel.

How do you keep costs under five dollars?

Wilkomm: I aim for five dollars or less. I get tons of corrugated plastic donated for free, so we spend no money on that. Then there’s Scapa Tape—a very aggressive double-sided foam tape that costs five cents a foot. If you fabricate something, and it doesn’t work out, and you have to reposition, you’re out a nickel’s worth of material. Buying Velcro in bulk helps too. Then Instamorph—it is non-toxic, biodegradable. You can reheat it, reform it, in five minutes or less up to six times. I’ve created about 132 different devices just using Instamorph. A lot of things I make out of Instamorph don’t necessarily work. I have a bucket and I reuse that Instamorph. We can get six, seven devices out of reusable Instamorph. That’s how we keep it under five dollars.

What key legislation impacts assistive technology?

Wilkomm: Definitely the Technology-Related Assistance Act. In the school system, however, it only says “did you consider assistive technology?” So that legislation really needs to be beefed up. The third piece of legislation I worked on was the AgrAbility legislation to fund assistive technology consultations and technical assistance for farmers and ranchers. The latest Technology-Related Assistance Act was reauthorized in 2022. Not a whole lot of changes—it’s still assistive technology device demonstrations and loans, device reuse, training, technical assistance, information and awareness. The other thing is NIDILRR—National Institute on Independent Living and Rehabilitation Research, funded under [the U.S. Department of Health and Human Services, a.k.a. HHS]. Funding the rehab engineering centers was pretty significant in advancing the field because these were huge, multimillion-dollar centers dedicated to core areas like communication and employment. Now there’s a new one out on artificial intelligence.

A Vision for a Better Assistive Tech Future

Over more than 2,000 hacks to improve usability of assistive technologies, veteran DIY maker Therese Wilkomm has earned the moniker “the MacGyver of assistive tech.” Therese Willkomm

What deserves more focus in your field?

Wilkomm: The supply-and-demand problem. It all comes down to time and money. We have an elderly population that continues to grow, and a disability population that continues to grow—high demand, high need for assistive technology, yet the resources available to meet that need are limited. A few years back, the Christopher & Dana Reeve Foundation had a competition. I submitted a proposal similar to the Blue Apron approach. People don’t have supplies at their house. They can’t buy two inches of tape—they have to buy a whole roll. They can’t buy one foot of corrugated plastic—they’ve got to buy an 18-by-24 sheet or wait till it gets donated.

With my third book, I created solutions with QR codes showing videos on how to make them. I used Christopher Reeve Foundation funding to purchase supplies. With Blue Apron, somebody wants to make dinner and a box arrives with a chicken breast, potato, vegetables, and recipe. I thought, what if we could apply that to assistive technology? Somebody needs something, there’s a solution out there, but they don’t have the money or the time—how can we quickly put it in a box and send it to them? People who attended my workshops didn’t have to spend money on materials or waste time at the store. They’d watch the video and assemble it.

But then there were people who said, “I do not have even five minutes in the school day to stop what I’m doing to make something.” So we found volunteers who said, “Hey, I can make slant boards. I can make switches. I can adapt toys.” You have people who want to build stuff and people who need stuff. If you can deal with the time and money issue, anything’s possible to serve more people and provide more devices.

What’s your biggest vision for the future?

Wilkomm: I’m very passionate about communication. December 15th was the passage in 1791 of our First Amendment, freedom of speech. Yet people with communication impairments are denied their basic right of freedom of speech because they don’t have an affordable communication device, or it takes too long to program or learn. I just wish we could get better at designing and fabricating affordable communication devices, so everybody is awarded their First Amendment right. It shouldn’t be something that’s nice to have—it’s something that’s needed to have. When you lose your leg, you’re fitted with a prosthetic device, and insurance covers that. Insurance should also cover communication devices and all the support services needed. With voice recognition and computer-generated voices, there are tremendous opportunities in assistive technology for communication impairments that need to be addressed.

What should IEEE Spectrum readers take away from this conversation?

Wilkomm: There’s tremendous need for this skill set—working in conjunction with AI and material sciences and the field of assistive technology and rehab engineering. I’d like people to look at opportunities to volunteer their time and also to pursue careers in the field of specialized rehab engineering.

How are DIY approaches evolving with new technologies?

Wilkomm: What we’re seeing at maker fairs is more people doing 3D printing, switch-access controls, and these five-minute approaches. There has to be a healthy balance between what we can do with or without electronics. If we need something programmed with electronics, absolutely—but is there a faster way?

The other thing that’s interesting is skill development. You used to have to go to college for four, six, eight years. With YouTube, you can learn so much on the internet. You can develop skills in things you never thought were possible without a four-year degree. There’s basic electronic stuff you can absolutely learn without taking a course. I think we’re going to have more people out there doing hacks, asking “What if I change it this way?” We don’t need to have a switch.

We need to look at the person’s body and how that body interacts with the electronic device interface so it requires minimal effort—whether it be eye control or motion control. Having devices that predict what you’re going to want next, that are constantly listening, knowing the way you talk. I love the fact that AI looks at all my emails and creates this whole thing like “here’s how I’d respond.” I’m like, yeah, that’s exactly it. I just hit select and I don’t have to type it all out. It speeds up communication. We’re living in exciting times right now.

Believr Pro Wrestling Free Download PC Game Cracked in Direct Link and Torrent. Believr Pro Wrestling – BPW gives you all the stress of running a wrestling promotion, without the money, the glory, or the safety net.

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: Believr Games

Publisher: Believr Interactive

Release Date: 29 Jan, 2026

Genre: Simulation, Management, Strategy, Text-Based

Believr Pro Wrestling is a wrestling promotion management simulation focused on decision-making, pressure, and long-term consequences. You control how shows are built, how matches and promos unfold, and how your roster develops over time, but outcomes are never guaranteed. Momentum, ego, timing, and context all matter, and the wider wrestling world continues to evolve whether you’re ready or not. 

For more information, game tools, mods & bug reports please see our forum:

COREFEATURES

Book weekly shows and PPVs with full control over matches, promos, and segments

Custom match flow system allowing you to build matches beat-by-beat (style, pacing, protection, key moments)

Custom promo flow system to shape promos, confrontations, and angles instead of relying on canned results

Showrunner mode that plays out your shows with live commentary and match narration

Manage wrestlers with momentum, morale, ego, popularity, and long-term development

Titles, win streaks, and status affecting behaviour and expectations

Living wrestling world with AI promotions that adapt their booking and strategy over time

Detailed show summaries and post-match reports explaining why things worked or didn’t

Epic Moments system that automatically remembers standout matches, segments and feuds to enhance future booking. 

Fully moddable database with custom promotions, wrestlers, titles, regions, and media

WHAT MAKES BPW DIFFERENT

No guaranteed outcomes or perfect information

Booking decisions compound quietly over time

Wrestlers react differently depending on pressure, role, and timing

Success raises expectations and creates new problems

Believr Pro Wrestling is not about perfect booking or instant feedback. It’s about managing uncertainty, personalities, and long-term consequences. Sometimes the right decision still goes wrong. Sometimes the damage doesn’t show up for months.

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Believr Pro Wrestling TORRENT:
Download Believr Pro Wrestling Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• Requires a 64-bit processor and operating system
• OS *: Windows 7 (64-bit)
• Processor: Dual-core 2.0 GHz (Intel Core i3-2100 / AMD A8-5600K or equivalent)
• Memory: 4 GB RAM
• Graphics: Integrated graphics with hardware acceleration support (Intel HD Graphics 4000 / AMD Radeon R5 / NVIDIA GeForce GT 730 or equivalent)
• DirectX: Version 11
• Storage: 800 MB available space
• Sound Card: DirectSound-compatible audio device
• VR Support: Not supported
• Additional Notes: Hardware acceleration recommended for optimal UI performance. The game stores data locally and can run fully offline after installation.

Recommended:

• Requires a 64-bit processor and operating system
• OS: Windows 10/11 (64-bit)
• Processor: Quad-core 3.0 GHz or better (Intel Core i5-10400 / AMD Ryzen 5 3600 or equivalent)
• Memory: 8 GB RAM
• Graphics: Dedicated graphics with 2GB VRAM (NVIDIA GTX 1050 / AMD RX 560 or equivalent) or modern integrated graphics (Intel Iris Xe / AMD Radeon Vega 8)
• DirectX: Version 12
• Storage: 2 GB available space
• Sound Card: DirectSound-compatible audio device
• VR Support: Not supported
• Additional Notes: SSD strongly recommended for fast database operations and app startup. 16GB RAM recommended when managing databases with 500+ wrestlers and custom images. Hardware acceleration enabled by default for smooth UI animations.

The post Believr Pro Wrestling Free Download appeared first on Install Guide Games.

Married Woman Countdown ASMR Sex VR Free Download PC Game Cracked in Direct Link and Torrent. Married Woman Countdown ASMR Sex VR – A VR adult game where you can have harem sex with two married women. The highlight this time is the immersive experience achieved through…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: AhrpuXR

Publisher: AhrpuXR

Release Date: 29 Jan, 2026

Genre: Adventure, Nudity, VR, Adult, Eroge

A VR adult game where you can have harem sex with two married women.

The highlight this time is the immersive experience achieved through ASMR-recorded audio and spatial sound.

Adult scenes allow switching between VR perspective and camera perspective.

Even in VR, you can enjoy erotic situations from a third-person viewpoint.

The player’s entire body is displayed,

allowing them to see themselves burying their face in buttocks or breasts from a camera perspective.

The dialogue is recorded using ASMR equipment and played back through a surround sound system.

The dialogue is fully voiced, featuring effects like breath being blown into your ear or your ear being licked.

As you draw near, her skin appears so finely textured you can almost feel its sheen,

breasts swaying, buttocks enveloped in harem-style eroticism.

When the player sticks out their tongue, the married woman leans in and entwines her tongue with theirs.

There’s also a scene where both of them kiss the player.

The scenes before and after sex are depicted, creating a more vivid portrayal of adult content.

The love hotel setting allows customization of lighting and music.

Change it to suit your mood.

For those with both hands occupied, a quick double nod displays the menu, enabling simple operation with just head movements.

VR controller vibration synchronization, synchronized operation with electric masturbators

The VR controller vibrates in sync with animations and VR controller movements.

Compatible with ButtPlug 4.0 and synchronizes with electric masturbators.

(Requires prior installation and execution of Intiface Central.)

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Married Woman Countdown ASMR Sex VR TORRENT:
Download Married Woman Countdown ASMR Sex VR Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Uploading…

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• Requires a 64-bit processor and operating system
• OS: windows10
• Processor: AMD Ryzen 5 2600
• Memory: 4 GB RAM
• Graphics: NVIDIA GeForce GTX 1660
• Storage: 1 GB available space
• VR Support: MetaQuest2(OculusLink,VirtualDesktop) , MetaQuest3(OculusLink,VirtualDesktop)

Recommended:

• Requires a 64-bit processor and operating system

The post Married Woman Countdown ASMR Sex VR Free Download appeared first on Install Guide Games.

Untrusted: hackers at large Free Download PC Game Cracked in Direct Link and Torrent. Untrusted: hackers at large – A single player hacking adventure set in the Untrusted world where you’ll be playing as various hackers getting into computer systems to hack, steal…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: playuntrusted.com

Publisher: Evolved Labs

Release Date: 29 Jan, 2026

Genre: RPG, Strategy, Puzzle, Adventure, Text-Based, Simulation

Untrusted: Hackers at Large

A single-player hacking adventure set in the Untrusted universe.

Step into the shadows of the late 1970s in this gritty, story-driven prequel to Untrusted. In Untrusted: Hackers at Large, you’ll manage an underground crew of digital operatives in a world where your every choice matters.

Infiltrate networks. Exploit vulnerabilities. Control the narrative.

Features

Realistic Hacking Mechanics

Explore an authentic command-line-inspired interface (with optional mouse-friendly commands). Whether you’re into realism or just want to get things done, some typing is required. Read files, exploit vulnerabilities, or use brute force: the choice is yours.

Crew Management Across the Globe

Command a network of skilled hackers: coordinate attacks, manage risk, and adapt your strategy as the digital landscape evolves.

Deduction Meets Strategy

Analyze systems. Identify weak points. Make decisions that ripple through the storyline and impact your crew’s survival.

A Unique Hacking x Management x RPG Blend

A hacking-focused game with some RPG and management elements: tactical gameplay meets narrative-driven decisions in a tight single-player experience. You’re not just a hacker.

Set in an Alternate Late-70s Timeline

Analog paranoia meets digital rebellion where nothing is safe. Immerse yourself in a retro setting where history took a darker turn.

Hack. Don’t die. These are the rules.

If you’re into grounded hacking mechanics and high-stakes choices, you’ll feel right at home.

Join our Discord to connect with the community, share strategies, and help shape the future of the Untrusted universe.

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Untrusted: hackers at large TORRENT:
Download Untrusted: hackers at large Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• Requires a 64-bit processor and operating system
• OS: Windows 10 64 bit
• Processor: x86_64 compatible cpu
• Memory: 4096 MB RAM
• Graphics: 3D accelerated card

Recommended:

• Requires a 64-bit processor and operating system
• OS: Windows 11 64 bit
• Processor: x86_64 compatible cpu
• Memory: 8192 MB RAM
• Graphics: 3D accelerated card

The post Untrusted: hackers at large Free Download appeared first on Install Guide Games.

SLEEPLESS Nocturne Free Download PC Game Cracked in Direct Link and Torrent. SLEEPLESS Nocturne – An erotic fantasy visual novel from the twisted mind of Sei Shoujo of Bible Black fame. A pair of college students wanders into Black Rose Manor, an isolated…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: Empress

Publisher: MangaGamer

Release Date: 29 Jan, 2026

Genre: Nudity, Adventure, Mature, Visual Novel, Anime, Adult, Eroge

Artist and writer Sei Shoujo’s erotic talents are on display once again in the sequel to SLEEPLESS – A Midsummer Night’s Dream, SLEEPLESS – Nocturne!

A pair of naive college students, Kawai Tomoki and Komori Yukino, are out on a date which is interrupted by a sudden car trouble. When the young couple abandons their vehicle to find help, they find themselves at the door to the Black Rose Manor. The dazzling Mamiya Marie, mistress of the estate, graciously invites them into the lavish splendor of the mansion where they are greeted by Aria, the estate’s stoic, yet alluring maid, Maria, Marie’s gorgeous daughter, and most mysteriously a pink-haired, cat-eared girl in a collar who introduces herself as Takamizawa Rui.

As the couple decides to spend the next few days at the isolated estate, are they prepared for the debauchery that awaits them…?

The erotic mastermind behind Bible Black and STARLESS (just to name a few!). Reprising his role as both artist and writer for the sequel, Sei Shoujo once again demonstrates why he has earned his legendary reputation as an erotic artist.

Twice As Nice?

Both protagonist Tomoki and his girlfriend Yukino entering the mansion together opens up a novel array of indecent opportunities to enjoy.

The cast of the previous game, SLEEPLESS – A Midsummer Night’s Dream, returns for more!

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link SLEEPLESS Nocturne TORRENT:
Download SLEEPLESS Nocturne Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• OS *: Windows 8.1 and up
• Processor: Intel Core i3/AMD A8
• Graphics: 1280×720
• Storage: 3 GB available space
• Sound Card: XAudio/DirectSound

Recommended:

• Graphics: 1920 x 1080

The post SLEEPLESS Nocturne Free Download appeared first on Install Guide Games.

DUSK INDEX: GION（ダスクインデックスギオン） Free Download PC Game Cracked in Direct Link and Torrent. DUSK INDEX: GION（ダスクインデックスギオン） – When the past awakens, the future bleeds. A full length cinematic sci-fi mystery visual novel where augmented reality, history, AI technology and…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: mebius.

Publisher: Bushiroad Inc.

Release Date: 28 Jan, 2026

Genre: Adventure, Visual Novel, Text-Based

【STORY】

A gripping time-crossing mystery set in Kyoto.

Investigate ritual murders across two eras through an immersive AR simulation of Meiji-era Japan.

Past and future collide in a story of fate, memory, and murder.

From the makers of Tokyo Dark…

◆ Two Timelines, One Truth

Two eras. Two investigations. Follow two detective teams separated by a century,

bound by a single mystery that defies time itself.

Can a killer murder across time or is history repeating itself?

◆ Cinematic Visual Novel Presentation

A full-length visual novel featuring high-quality character art and cinematic, story-driven scenes.

【CAST】

Daiki Katsuki（CV.Yohei Azakami）

Rio Quinn（CV.Yuuki Temma）

Masayoshi Nagahama（CV.Ryotaro Okiayu）

Saki（CV.Yoko Hikasa）

Hikari（CV.Hikaru Tono）

Dee（CV.Shuta Morishima）

Galaxy（CV.Yuzuki Watase）

Togawa（CV.Wataru Urata）

Suburi-Chan（CV.Haruna Fukushima）

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link DUSK INDEX: GION（ダスクインデックスギオン） TORRENT:
Download DUSK INDEX: GION（ダスクインデックスギオン） Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• Requires a 64-bit processor and operating system
• OS: Windows 11
• Processor: Core i5-1335U
• Memory: 8 GB RAM
• Graphics: Intel Iris Xe Graphics
• DirectX: Version 11
• Additional Notes: Requires a 64-bit processor and operating system

Recommended:

• Requires a 64-bit processor and operating system

The post DUSK INDEX: GION（ダスクインデックスギオン） Free Download appeared first on Install Guide Games.

Drunkard Simulator Free Download PC Game Cracked in Direct Link and Torrent. Drunkard Simulator – Drink. Stumble. Cause chaos. Drunkard Simulator lets you turn your neighborhood into a boozy playground of impulsive stunts and slapstick mayhem.

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: PostHuman Interactive

Publisher: PostHuman Interactive

Release Date: 26 Jan, 2026

Genre: Simulation, Adventure, Action, Open World, Management, RPG, Survival

Multiplayer will be included in Early Access. The demo is single-player only.

Make Bad Choices!

A physics-based sandbox comedy game where you are the disaster.

Drink, stumble, steal, and smash your way through an open neighborhood where bad decisions turns into unforgettable chaos. The world reacts, physics take over, and every dumb idea becomes a story you won’t remember tomorrow.

Lose control, unlock absurd abilities, and turn your surroundings into your personal playground – solo or with your drinking buddies.

A Sandbox Built for Chaos

This is a fully open, physics-driven sandbox where nearly everything can be picked up or stolen.

Carry a full barbecue grill down the street.

Climb rooftops.

Ride a stolen shopping cart straight into disaster.

If you can lift it, drag it, throw it, or crash it… it’s fair game.

Drink, Survive, Escalate

Drinking isn’t just cosmetic – it’s a survival system.

Your BAC affects:

Movement

Balance

Decision-making

What ridiculous actions you can pull off

The drunker you get, the more chaotic (and powerful) you become… but staying upright gets harder. Push your limits or face the consequences of gravity and bad judgment.

Will You Become a Local Legend?

Wreak havoc, pull off legendary stunts, drive drunk, and make sure the NPCs never forget your drunken adventures. No consequences, no regrets—just a whole lot of chaos.

Grab a (virtual) drink, stumble into the unknown, and make a glorious mess in the ultimate sandbox of drunken stupidity! 

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Drunkard Simulator TORRENT:
Download Drunkard Simulator Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• Requires a 64-bit processor and operating system
• OS: 64-bit Windows 10
• Processor: Intel® Core i7-2700K or AMD Ryzen 5 1600X
• Memory: 16 GB RAM
• Graphics: GeForce GTX 1060 6GB or Radeon RX 580 8GB or Arc A580
• DirectX: Version 12
• Storage: 30 GB available space
• Additional Notes: SSD strongly recommended.

Recommended:

• Requires a 64-bit processor and operating system
• OS: 64-bit Windows 10
• Processor: Intel® Core i5-10500 or AMD Ryzen 5 3600X
• Memory: 16 GB RAM
• Graphics: GeForce RTX 3060 Ti or RX 6750 XT or Arc A770
• DirectX: Version 12
• Storage: 30 GB available space
• Additional Notes: SSD required.

The post Drunkard Simulator Free Download appeared first on Install Guide Games.

Ren’ai 0 Kilometer Free Download PC Game Cracked in Direct Link and Torrent. Ren’ai 0 Kilometer – &quot;Love 0 Kilometers&quot; is a novel game with choices. The ending will change depending on the choices you make. Through a limited-time family…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: kawaiinium, ASa Project

Publisher: kawaiinium

Release Date: 28 Jan, 2026

Genre: Adventure, Visual Novel, Simulation, Nudity, Adult, Eroge

“Ren’ai 0 Kilometer” is a novel game with choices.

The ending will change depending on the choices you make. Through a limited-time family swap, the protagonist spends time with his childhood friend, deepening his relationship with a cute girl and enjoying special conversations.

The Yazaki and Kinomoto families live next door to each other.

The Yazakis are four brothers raised by their father, and the Kinomotos are five sisters raised by their mother. Both families have long wished for the child they never had: the Yazakis want a daughter, and the Kinomotos want a son.

One day, the parents come up with a wild idea: “Let’s each trade one of our kids and have them live with the other family for three months!” And so, the Yazaki’s second son, Kyouichi, and the Kinomoto’s second daughter, Sakuya, switch places and begin their new swapped lives.

Key Fetures:

• Mayo Kinomoto, VA: Maya Suzuya
• Sakuya Kinomoto, VA: Soyogi Tohno
• Misaki Kinomoto, VA: Nazuna Gogyo
• Nokia Kinomoto, VA: Miyu Isuzu
• Hana Kinomoto, VA: Misono Moriya

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Ren’ai 0 Kilometer TORRENT:
Download Ren’ai 0 Kilometer Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• Requires a 64-bit processor and operating system
• OS: Windows 10 or higher
• Processor: Intel Core i series or higher (excluding low-voltage models)
• Memory: 4 GB RAM
• Graphics:
• DirectX: Version 11
• Storage: 2 GB available space
• Sound Card:
• VR Support: Not supported
• Additional Notes: Steam client installation required Internet connection required Pointing device (mouse, trackpad, etc.) required Operation on virtual machines (including Apple Boot Camp) is not guaranteed

Recommended:

• Requires a 64-bit processor and operating system

The post Ren’ai 0 Kilometer Free Download appeared first on Install Guide Games.

Steel Century Groove Free Download PC Game Cracked in Direct Link and Torrent. Steel Century Groove is a rhythm RPG where you pilot mecha in dance battles! Using your own music or the built-in soundtrack, challenge yourself against the deep rhythm combat…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: Sloth Gloss Games

Publisher: Sloth Gloss Games

Release Date: 28 Jan, 2026

Genre: Adventure, Anime, RPG, Action, Visual Novel, Sci-fi

Thousands of years ago, humanity built colossal war machines to stop the apocalypse. Now they just use them for dance battles!

Using your own music or the built-in soundtrack, groove your way across a rich world, assemble the perfect mecha crew, and rise from humble beginnings to ultimate stardom.

Additional Features:

Collect and Upgrade: Level up your mechs, equip them with mods, and pair them with different combinations of backup dancers.

Unique Gameplay Kits: Each mech has its own set of abilities, mechanics, and resources. A simple starter mech builds and spends energy, while later mechs have you maintaining an army of drones or swapping between cards in a mini deck-builder.

Flexible Rhythm Combat: Steel Century Groove doesn’t demand a specific button press for each note. Instead, pick from your mech’s kit of battle abilities.

No Playing the Metronome: Challenge yourself against interesting melodies, even when playing with your own music. You’ll never just be endlessly tapping out the beat.

No Accessories Required: Built from the start for gamepad or mouse & keyboard.

Streamer Mode On: Enable Streamer Mode and the game will play only exclusive, original music that won’t trigger any copyright claims on YouTube, Twitch, etc. 

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Steel Century Groove TORRENT:
Download Steel Century Groove Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• Requires a 64-bit processor and operating system
• OS: Windows 10/11
• Processor: Intel Quad Core 2.3Ghz or equivalent
• Memory: 8 GB RAM
• Graphics: Nvidia GTX 970 / AMD Radeon R9 290
• DirectX: Version 11
• Storage: 5 GB available space

Recommended:

• Requires a 64-bit processor and operating system

The post Steel Century Groove Free Download appeared first on Install Guide Games.

Dark Auction Free Download PC Game Cracked in Direct Link and Torrent. Dark Auction – Noah lives with his eccentric father, who’s obsessed with Dictator X. When he joins a strange auction at a castle, he must work to solve mysteries hidden in the…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: IzanagiGames

Publisher: IzanagiGames, GOOD SMILE COMPANY

Release Date: 28 Jan, 2026

Genre: Adventure, Visual Novel, Nudity, Adult, Eroge

A brand-new mystery adventure game, with both story and script written by Rika Suzuki, known for her brilliant work on Another Code/Trace Memory and Hotel Dusk: Room 215. It also features character design by Kohske, author/illustrator of GANGSTA., and music by Monster Hunter composer, Yuko Komiyama, and Tsukasa Masuko, composer for the Megami Tensei series. Directed and produced by Shinsuke Umeda (IzanagiGames).

Game features:

In the exploration phase, you will search rooms and floors, and talk to other participants, revealing trauma and lies that will lead you to the truth each one keeps hidden.

Information you learn here will be stored in your Word Cloud, and can then be used to solve mysteries during each auction!

But in this place, the auction exhibits aren’t bid on with money, but with memories.

Key Fetures:

• Explore freely within an old castle rendered in 3D
• Use reasoning and deduction to solve clues via the Word Cloud System
• Use memories to expose the truth via each Auction

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Dark Auction TORRENT:
Download Dark Auction Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• OS: 64-bit Windows 10
• Processor: Intel® Core i5
• Memory: 8 GB RAM
• Graphics: DirectX 11 or later
• DirectX: Version 11
• Network: Broadband Internet connection
• Storage: 8 GB available space

The post Dark Auction Free Download (v1.0.3) appeared first on Install Guide Games.

Labyrinth of Touhou Tri -The Dreaming Girls & The Mysterious Orbs- Free Download PC Game Cracked in Direct Link and Torrent. Labyrinth of Touhou Tri -The Dreaming Girls & The Mysterious Orbs- – The girls of Gensokyo weave together a DRPG with not-so-easy boss fights! Form a party of 12 allies out of a…

CRACKED – FREE DOWNLOAD – TORRENT

Game Overview

Developer: Nise-Eikoku Studio

Publisher: Nise-Eikoku Studio

Release Date: 28 Jan, 2026

Genre: RPG, Hack and Slash, Anime, Adventure

The girls of Gensokyo weave together a dungeon RPG with an estimated playtime of 30~50 hours.

Pick a frontline of 4 and a rear of 8 to form a party of 12 characters out of a pool over 40+ and conquer extensive dungeons!

Among the enemies wandering dungeons, you’ll find especially troublesome (and tasty!) Rare Enemies that give much more EXP,

Giant Enemies that are several times as stronger than regular ones and tens of times more rewarding,

and Special Enemies that possess various unique aspects to their fights and hold special item drops!

Raise and lower the spawn rate of various enemies, waiting in ambush for some and running from others as you explore vast dungeons!

Find the perfect hunting ground for your party and go farming for a while!

Use various means to devise certain, consistent strategies for powerful foes and grind, grind, grind to grow stronger!

Key Fetures:

• A Fanmade Touhou Project DRPG With Not-So-Easy Boss Fights!
• The True Thrill of DRPGs – Hacking, Slashing, and Character Growth!
• Builds and Counter-Builds Are the Key to Beating Bosses!
• Utilize Boss Refights to Use Bosses to Farm and Challenge Even Fiercer Battles!
• Skill Trees With Over 1000 Skills For Designing Your Own Synergies!

DOWNLOAD LINKS

All links are interchangeable, you can download different parts on different hosts
Request a game or request re-upload, visit Game Request
If you need help a problem, visit F.A.Q

Link Labyrinth of Touhou Tri -The Dreaming Girls & The Mysterious Orbs- TORRENT:
Download Labyrinth of Touhou Tri -The Dreaming Girls & The Mysterious Orbs- Torrent Link

Link MegaUp.net:
Download HERE

Link Mega.nz:
Download HERE

Link 1Fichier:
Download HERE

Link GoFile:
Download HERE

Link MixDrop:
Download HERE

Link Rapidgator:
Download HERE

Link Bowfile:
Download HERE

Link SendCM:
Download HERE

Link Clicknupload:
Uploading…

(See instructions if you don't know how to install: Instructions on how to install)

1.  Extract/Install.
2.  Crack if needed.
3.  Play game.
4.  Have fun ^^.
5.  (OPTION) Install the update version if they have the future in the link below:

System Requirement

Minimum:

• OS: Windows 10/11
• Processor: Core i3 8100 or Equivalent
• Memory: 8 GB RAM
• Graphics: NVIDIA GTX 1060
• Storage: 1 GB available space

Recommended:

• Processor: Core i3 12100 or Equivalent
• Memory: 16 GB RAM

The post Labyrinth of Touhou Tri -The Dreaming Girls & The Mysterious Orbs- Free Download (v1.005) appeared first on Install Guide Games.

#6465 Nova Antarctica: Premiere Collection + Official Visual Book DLC

Genres/Tags: Adventure, Exploration, Item crafting, Survival, Third-person, 3D
Companies: RexLabo, Parco Games
Languages: ENG/MULTI10
Original Size: 2.8 GB
Repack Size: 1.9 GB

Download Mirrors (Direct Links)

• Filehoster: DataNodes (Speed & Usability) [Use IDM]
  Click to show direct links

  Nova_Antarctica_–_fitgirl-repacks.site_–_.part1.rar
  Nova_Antarctica_–_fitgirl-repacks.site_–_.part2.rar
  Nova_Antarctica_–_fitgirl-repacks.site_–_.part3.rar
  Nova_Antarctica_–_fitgirl-repacks.site_–_.part4.rar
  
• Filehoster: FuckingFast (REALLY Fucking Fast )
  
  Click to show direct links

  Nova_Antarctica_–_fitgirl-repacks.site_–_.part1.rar
  Nova_Antarctica_–_fitgirl-repacks.site_–_.part2.rar
  Nova_Antarctica_–_fitgirl-repacks.site_–_.part3.rar
  Nova_Antarctica_–_fitgirl-repacks.site_–_.part4.rar
• Filehoster: MultiUpload (10+ hosters, interchangeable) [Use JDownloader2]

Download Mirrors (Torrent)

• 1337x | [magnet] [.torrent file only]
  
• Tapochek.net

Discussion and (possible) future updates on CS.RIN.RU thread

Screenshots (Click to enlarge)

Repack Features

• Based on Nova.Antarctica-RUNE ISO release: rune-nova.antarctica.iso (2,998,992,896 bytes)
• Official Visual Book DLC is included by default
• 100% Lossless & MD5 Perfect: all files are identical to originals after installation
• NOTHING ripped, NOTHING re-encoded
• Significantly smaller archive size (compressed from 2.8 GB to 1.9 GB)
• Installation takes 1-2 minutes (depending on your system)
• After-install integrity check so you could make sure that everything installed properly
• HDD space after installation: 7.2 GB
• Language can be changed in game settings
• Repack uses XTool library by Razor12911
• At least 2 GB of free RAM (inc. virtual) required for installing this repack

The post Nova Antarctica: Premiere Collection + Official Visual Book DLC appeared first on FitGirl Repacks.

These days, Windows has a moderately robust method for managing the volume across several applications. The only problem is that the controls for this are usually buried away. [CHWTT] found a way to make life easier by creating a physical mixer to handle volume levels instead.

The build relies on a piece of software called MIDI Mixer. It’s designed to control the volume levels of any application or audio device on a Windows system, and responds to MIDI commands. To suit this setup, [CHWTT] built a physical device to send the requisite MIDI commands to vary volume levels as desired. The build runs on an Arduino Micro. It’s set up to work with five motorized faders which are sold as replacements for the Behringer X32 mixer, which makes them very cheap to source. The motorized faders are driven by L293D motor controllers. There are also six additional push-buttons hooked up as well. The Micro reads the faders and sends the requisite MIDI commands to the attached PC over USB, and also moves the faders to different presets when commanded by the buttons.

If you’re a streamer, or just someone that often has multiple audio sources open at once, you might find a build like this remarkably useful. The use of motorized faders is a nice touch, too, easily allowing various presets to be recalled for different use cases.

We love seeing a build that goes to the effort to include motorized faders, there’s just something elegant and responsive about them.